Metalizing gun prices depend on the different types of metalizing gun models. The metalizing spray gun is a general name given to a thermal spray coating process that is utilized for coating metal on product surfaces. The resultant metallic coatings can be utilized for protective, decorative, or functional objectives. These types of coatings are also known to be long-lasting, effective, and highly versatile. Spray Coatings specializes in three
Types of Metalizing Processes
- Electric arc spray
- Combustion powder spray
- Combustion wire spray
Electric Arc Spray
In the Electric Arc Spray gun process, we use two metallic wires that are electrically charged with opposing polarity as the coating feedstock. This will cause them to throw a molten arc between each other. We will next inject inert gas or high-velocity air to trigger the atomization of the now-molten material and propel it onto the substrate to form the coating.
Depending on the equipment being used and the material being applied, A&A Coatings can provide metallic coatings with either semi-metallurgical bonds or mechanical bonds up to 5000 P-S-I. Distortion will not occur because the substrate is not exposed to a high temperature of over 250°F.
Combustion Powder Spray
In the Combustion Powder Spray process, the basic principle of the heat source is the same as wire spray except that powders are fed through a flame and propelled by high-velocity oxygen or air onto a substrate. As among the metalizing process, any powdered metal or ceramic having a melting point under 5500°F. can be sprayed. The metalizing coating process is mainly used for abradable coatings and spray/fuse hard surfacing.
Combustion Wire Spray
In the Combustion Wire Flame Spray Gun process, we feed the spray material in wire form into a fuel gas-oxygen flame where it is melted by the heat (temperature up to 5500°F) of that combustion. Compressed air is concentrated around the flame, atomizing the molten metal (substance) into fine spherical particles and propelling these particles at high velocity onto a substrate.
We can manipulate the atomization and the melting of metals with different melting points when we control the feeding rate of the wire through the flame. When you opt for this method, we can spray any wire as long as it features a melting point below 5500°F.
Advantages of MetalizingGun
- To achieve insulation
- Resistance to corrosion
- Significant cost advantages
- Not subject to degrading
- Anodic protection of surface
- No cure time or temperature to limit metalizing
- Stronger adhesion than paint
- Longer lasting than paint
- Faster and more productive
- Surface roughness no more than 0.05 mm
- Pure metals and alloys can be sprayed
- Can be operated under extreme temperature conditions
Metalizing Gun for sale
Thermal Spray gun is the leading Manufacturer, Supplier & Exporter of the metalizing gun, arc spray gun, flame spray gun, sand blasting machine, sand blasting cabinet, sand blasting room, Shot blasting machine, shot blasting room, shot blasting nozzles in India at a reasonable rate for sale.